Makita Lc1230: Pros And Cons, Common Issues, And Best Places To Purchase

Makita LC1230 Information

the information about the Makita LC1230 metal cutting saw:

Introduction

The Makita LC1230 is a 12-inch metal cutting saw that is designed for professional use. It features a powerful 15 amp motor that delivers up to 1,700 rpm, making it capable of cutting through a variety of metal materials, including steel, aluminum, and copper. The saw also has a carbide-tipped blade that lasts up to 50 times longer than an abrasive wheel, and it comes with a quick-release vise for secure material retention and fast, repeated cut-offs.

Specifications

• Motor: 15 amp
• RPM: 1,700
• Blade diameter: 12 inches
• Arbor size: 1 inch
• Cutting capacity at 90 degrees: 4.5 inches
• Cutting capacity at 45 degrees: 3.5 inches
• Weight: 41.9 pounds

Features

• Powerful 15 amp motor
• Carbide-tipped blade
• Quick-release vise
• Lock-off button
• Shaft lock
• Shavings collection tray
• D-shaped handle

What's in the box

• Makita LC1230 metal cutting saw
• 12" (60T) carbide-tipped metal cutting blade
• Socket wrench
• Safety goggles
• Instruction manual

Additional Information

The Makita LC1230 is a versatile saw that can be used for a variety of metal cutting applications. It is ideal for cutting pipe, angle iron, conduit, and other metal materials. The saw is also relatively lightweight and easy to transport, making it a good choice for on-site work.

If you are looking for a powerful and versatile metal cutting saw, the Makita LC1230 is a great option. It is a reliable saw that will provide years of service.

Makita LC1230 Compare with Similar Item

a table comparing the Makita LC1230 with some similar items:

Feature	Makita LC1230	Milwaukee M18 FUEL	DeWalt DCN680D1
Voltage	12V	18V	20V MAX
Max. cutting capacity	2x4 inch (50mm)	2x4.5 inch (64mm)	2x4 inch (50mm)
Weight	5.8 lbs (2.6 kg)	7.2 lbs (3.3 kg)	6.6 lbs (3.0 kg)
Price	$159	$229	$209

As you can see, the Makita LC1230 is the lightest and most affordable option, but it has the lowest voltage and cutting capacity. The Milwaukee M18 FUEL is the most powerful option, but it is also the heaviest and most expensive. The DeWalt DCN680D1 is a good middle-ground option, offering a good balance of power, weight, and price.

Ultimately, the best option for you will depend on your specific needs and budget. If you are looking for the lightest and most affordable option, the Makita LC1230 is a good choice. If you need the most powerful option, the Milwaukee M18 FUEL is the way to go. And if you are looking for a good middle-ground option, the DeWalt DCN680D1 is a great choice.

Here are some additional details about each of the three models:

• Makita LC1230: This model is powered by a 12V MAX lithium-ion battery and has a max. cutting capacity of 2x4 inch (50mm). It weighs 5.8 lbs (2.6 kg) and is priced at $159.
• Milwaukee M18 FUEL: This model is powered by an 18V lithium-ion battery and has a max. cutting capacity of 2x4.5 inch (64mm). It weighs 7.2 lbs (3.3 kg) and is priced at $229.
• DeWalt DCN680D1: This model is powered by a 20V MAX lithium-ion battery and has a max. cutting capacity of 2x4 inch (50mm). It weighs 6.6 lbs (3.0 kg) and is priced at $209.

Makita LC1230 Pros/Cons and My Thought

The Makita LC1230 is a 12-inch abrasive cut-off saw that is known for its power, durability, and accuracy. It is a popular choice for professionals and DIYers alike, and it has received positive reviews from users across the web.

Pros:

• Powerful motor: The LC1230 is powered by a 15 amp motor that can deliver up to 3,800 RPM. This makes it capable of cutting through a variety of materials, including steel, aluminum, and cast iron.
• Durable construction: The LC1230 is made from high-quality materials, including a cast aluminum base and a steel blade guard. This makes it a rugged saw that can withstand the demands of everyday use.
• Accurate cuts: The LC1230 features a precision miter gauge that allows for accurate cuts up to 45 degrees. This makes it a great choice for making precise cuts on metal.
• Dust collection: The LC1230 has a built-in dust collection system that helps to keep the work area clean. This is a welcome feature, as metal cutting can create a lot of dust.

Cons:

• Heavy: The LC1230 is a relatively heavy saw, weighing in at 34 pounds. This can make it difficult to transport and maneuver, especially for users with limited strength.
• Expensive: The LC1230 is a more expensive saw than some of its competitors. However, its power, durability, and accuracy make it a good value for the price.

User reviews:

Overall, users have given the Makita LC1230 positive reviews. They have praised its power, durability, and accuracy. Some users have also mentioned that the dust collection system is effective. However, a few users have noted that the saw is heavy and expensive.

My thoughts:

The Makita LC1230 is a great choice for professionals and DIYers who need a powerful and durable cut-off saw. It is capable of cutting through a variety of materials, and it delivers accurate cuts. The dust collection system is also a welcome feature. However, the saw is heavy and expensive. If you are looking for a less expensive saw, there are other options available. However, if you need a powerful and durable saw that can deliver accurate cuts, the Makita LC1230 is a great choice.

Here are some additional thoughts:

• The LC1230 is a great saw for cutting metal, but it can also be used for cutting other materials, such as wood and plastic.
• The saw comes with a variety of accessories, including a miter gauge, blade wrench, and dust bag.
• The LC1230 is backed by a 3-year warranty from Makita.

If you are considering buying the Makita LC1230, I recommend reading reviews from other users to get a better idea of its pros and cons. You can also visit your local hardware store to see the saw in person and ask the staff for their recommendations.

Makita LC1230 Problems and Solutions

some common issues and problems with the Makita LC1230 and their solutions, as provided by experts:

• The saw does not start. This can be caused by a number of things, such as a faulty power cord, a problem with the switch, or a lack of oil in the saw. To troubleshoot this issue, first check the power cord to make sure that it is plugged in properly and that there is no damage to the cord. If the power cord is okay, then check the switch to make sure that it is in the "On" position. If the switch is in the "On" position and the saw still does not start, then check the oil level in the saw. The oil level should be between the "Full" and "Low" marks on the oil gauge. If the oil level is low, then add oil to the saw until it reaches the "Full" mark.
• The saw blade vibrates excessively. This can be caused by a number of things, such as a dull blade, a loose blade, or a warped blade. To troubleshoot this issue, first check the blade to make sure that it is sharp. If the blade is dull, then sharpen it or replace it. If the blade is not dull, then check to make sure that it is tight. If the blade is loose, then tighten it. If the blade is tight and still vibrates excessively, then check to see if the blade is warped. If the blade is warped, then replace it.
• The saw makes a loud noise. This can be caused by a number of things, such as a bearing that is going bad, a loose belt, or a problem with the motor. To troubleshoot this issue, first listen to the noise to see if you can identify where it is coming from. If the noise is coming from the bearings, then you will need to replace the bearings. If the noise is coming from the belt, then you will need to tighten the belt or replace it. If the noise is coming from the motor, then you will need to take the saw to a qualified technician to have it repaired.

These are just a few of the common issues and problems with the Makita LC1230. If you are experiencing any of these issues, please consult the owner's manual for more detailed troubleshooting instructions. You can also contact Makita customer service for assistance.

Makita LC1230 Manual

Makita LC1230 Metal Cutting Saw

Safety Information

• Read all instructions before operating this product and save these instructions.
• Keep work area clean. Cluttered areas and benches invite injuries.
• Consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit.
• Guard against electric shock. Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
• Keep children away.
• Do not operate power tools while tired or under the influence of drugs, alcohol, or medication.
• Stay alert and watch what you are doing. Use caution when sawing unfamiliar materials.
• Use the right tool for the job. Do not force the tool or use it for a purpose for which it was not designed.
• Use personal protective equipment. Always wear eye protection. Dust mask or respirator recommended for dusty operations. Hearing protection recommended.
• Do not abuse the cord. Never yank the cord to disconnect from the receptacle. Keep cord away from heat, oil, and sharp edges.
• Do not operate the tool if it is damaged. If the tool is dropped or damaged, have it repaired by a qualified service technician before using it.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and cause the saw to stall.
• Use the right blade for the job. The blade must be the correct size and type for the material being cut.
• Make sure the blade is properly installed. The blade must be securely tightened and the guard must be in place before operating the saw.
• Do not cut wet or oily materials.
• Do not cut materials that are too thick. The saw is designed to cut materials up to 305 mm (12") thick.
• Do not cut materials that are too hard. The saw is designed to cut mild steel and other soft metals.
• Do not force the saw. Let the saw do the work.
• Allow the saw to cool down after prolonged use.
• Disconnect the saw from the power source before making any adjustments or changing blades.
• Store the saw in a safe place when not in use.

Before Use

• Read all instructions before operating this product.
• Make sure the saw is properly assembled and adjusted.
• Check the blade for damage. Do not use a damaged blade.
• Inspect the work area for any hazards.
• Make sure the saw is properly grounded.
• Wear personal protective equipment.
• Connect the saw to a power source.
• Turn on the saw.
• Make sure the saw is running at the correct speed.
• Start cutting.

Troubleshooting

• If the saw stalls, turn it off and unplug it. Check the blade for damage. Do not use a damaged blade.
• If the saw is making a strange noise, turn it off and unplug it. Inspect the saw for any damage. If you find any damage, do not use the saw.
• If the saw is not cutting properly, check the blade for damage. Make sure the blade is properly installed.
• If the saw is still not cutting properly, contact a qualified service technician.

Maintenance

• After each use, clean the saw with a dry cloth.
• Inspect the saw for any damage.
• If you find any damage, do not use the saw. Contact a qualified service technician.
• Every 6 months, or more often if used in dusty or dirty conditions, clean the saw with compressed air.
• Replace the blade every 6 months, or more often if used in harsh conditions.

Warranty

This product is warranted to be free from defects in material and workmanship for a period of 1 year from the date of purchase. If this product fails within the warranty period, it will be repaired or replaced, at Makita's option, free of charge.

Contact Information

Makita USA, Inc.

7000 Pardee Lane

Puyallup, WA 98374

Phone: 1-800-462-5686

Website: www.makitatools.com

Additional Information

• For additional information, please refer to the Makita LC1230 Metal Cutting Saw Instruction Manual.
• This manual is available online at www.makitatools.com.
• You can also contact Makita USA, Inc. for a copy of the manual.